Please select a category from below

Electric switchboard matting

We hold stocks of fluted electrical switchboard matting in both 6mm thick rated at 450 volts (11 KV tested) & 9.5mm thick rated at 650 volts (15 KV tested) this thickness complies fully with BS.Standard 921-1976, we can supply in full rolls (normally 10-11.5 mtrs) or cut lengths, in a choice of 915mm, 1 mtr & 1.22 mtr widths. Electricians gloves/gauntlets also available.

Diamond pyramid

We offer a range of textured rubber & vinyl flooring/matting with raised chequered/diamond/ pyramid/reverse pyramid surfaces for many uses that require a multi-directional anti-slip matting available in black & other colours,the vinyl type is also supplied in metallic silver grey, & a special ozone resistant grade in black, white & brown .

Ribbed-fluted

We offer ribbed/fluted rubber & vinyl matting in many colours,with fine/flat/wide/broad flutes,from 2mm lightweight upto 12mm heavy duty types.We also offer special grades: oil resistant, spike/stud resistant,anti-flammable, & to prevent slip hazards an abrasive top surface matting. All types supplied in full rolls or cut pieces.

Stud matting

Stud matting is available with a raised square or round stud, from 2mm thick upwards, ideal for locker rooms/hosiptals/schools/exhibition stands/ shops/corridors & walkways etc. available in rolls, cut sheet and tile form, the vinyl type in a range of bright colours & metallic finishes in gold, silver & bronze etc, fire-resistant grade also available.

Duckboard matting

PVC / vinyl duck-board matting is ideal for indoor and outdoor use, 10-16mm thick in a range of colours, either in rolls/cut sheets or tile form. Ideal for swimming pool areas, changing rooms, catering trade, breweries & bottling plants, some grades are oil / grease resistant for use in factories, oil tankers & fishing vessels. For patios and roof gardens we have interlocking plastic tiles in green & other colours.

Caps

We offer a comprehensive range of protection caps/plugs for threads & masking applications etc, we have many styles/sizes available including thermoplastic and silicone for high temperature use, we also supply hole & ventilation plugs/caps, screw/nut caps, dome plugs & dust caps etc.

Grommets

We offer a full range of grommets: open/blind/ semi-blind/cable-entry sleeve type/self-sealing blind type & grommet feet etc. these are offered in natural rubber/neoprene/nitrile/EPDM/silicone/ & PVC etc, a vast range of sizes are available including NATO grommets, grommet kits, we also offer extruded grommet strip for edge protection.

Handle bar grips

We offer a range of PVC, rubber & foam handle grips to suit a variety of applications, round from 3mm (1/8") upto 32mm (1.1/4"), also square/flat/ rectangular sections in a range of sizes, PVC types are often available in colours, but colours can be made to order, we also offer plastic dip mouldings.

Feet

We have a range of plastic feet, screw-fixing type 11mm upto 25mm dia for cabinet work in a range of styles,& for tubular furniture: rectangular/round oval & square tube, non-tilt adjustable feet/glides, mushroom headed, self-adhesive stick on bumper feet, push on feet, PVC tips for wire frames from 1.2mm dia upwards, also similar items in rubber.

Doorstops

We stock a full range of rubber/plastic doorstops from 28mm (1.1/8") up to 50mm (2") dia in black & white, together with 2 part concealed fixing type, for smaller sizes we offer a variety of screw on buffers in both rubber/plastic to cover many applications.

Ferrules

We offer a comprehensive range of plastic/rubber ferrules, to fit both internal & external fitting for round/square/rectangular & oval tube,for metric & imperial sizes, in a variety of styles/patterns, all are available in black, the popular sizes in colours also, other colours can be supplied to order.

Buffers

We offer a range of buffers, suitable for use in the furniture trade etc, there are various types/styles available, round/rectangular screw-fixing, push-in mushroom/flat headed types, also clear buffers for use with glass table tops & self-adhesive bumper feet, the range includes both plastic & rubber parts.

Plastic tube end fittings

We have an extensive range of tube end fittings for the furniture, packaging, & scaffolding trades etc, these include types for fitting inside & outside round/square/rectangular/oval tube, both metric & imperial sizes,most available in choice of colours, we also have a range of saddle fittings for tubular furniture, threaded inserts & adjustable feet/glides.

Suction pads

We offer a range of PVC suction pads, of various shapes/sizes from 12.5mm(1/2") upto 75mm (3") in clear & colours, suitable for window displays/ notices & many other uses, we also stock rubber types, please see under 'suckers' for further information.

Custom Mouldings

We offer extremely competitive prices for new tooling to your own design in a range of thermo- plastic materials. Utilising the latest technology in low cost toolmaking, we can assist with design & technical difficulties of any proposed designs to ensure the correct material is offered.

Bungs

We offer a very large range of tapered bungs/corks used for laboratory work, wine making & masking uses etc, available in red rubber, grey neoprene, (black EPDM & translucent silicone etc for high temperature use) together with the full range of sizes to BS 2775, along with real cork stoppers.

Suckers

We hold stocks of rubber suckers in many styles & sizes from 16mm (5/8") upto 75mm (3") for window/notice displays etc and many other uses. double-sided types are also available, we also have pvc types available, see under 'suction pads'.

Doorstops

We stock a full range of rubber/plastic doorstops from 28mm (1.1/8") up to 50mm (2") dia in black & white, together with 2 part concealed fixing type, for smaller sizes we offer a variety of screw on buffers in both rubber/plastic to cover many applications.

Seat buffers

We stock a comprehensive range of black & white rubber seat buffers from 12mm (1/2") up to 50mm (2") dia. certain sizes are moulded with metal washers. In addition to our standard range we have many other moulds available for these in a variety of styles, shapes and sizes in both rubber & plastic all of which can be supplied in colours.

Chair ferrules

We hold considerable stocks of rubber chair ferrules for use on tubular furniture/wire frames etc, available in a range of sizes from 3mm (1/8") upto 38mm (1.1/2") outside dia. in various patterns, most sizes stocked in both black & white other colours available to order.

Tailboard buffers

Tailboard buffers prevent damage to loading bays and backs of lorries etc, also available is a wide range of solid & hollow 'D' section fender strip for similar applications.

Mushroom buffers

We offer a very large range of mushroom and flat top buffers, in many sizes, certain types are held in clear PVC for glass top tables etc, we have many other moulds available for these items and welcome your enquiries for these.

Walking stick / crutch pads

We stock a comprehensive range of black rubber ferrules/pads for use on walking sticks, crutch pads & walking frames etc, in a choice of styles from 10mm (3/8") upto 38mm (1.1/2") some are stocked in grey or white, with some having metal washers, Anti-static type available to order.

Grommets

We offer a full range of grommets: open/blind/ semi-blind/cable-entry sleeve type/self-sealing blind type & grommet feet etc. these are offered in natural rubber/neoprene/nitrile/EPDM/silicone/ & PVC etc, a vast range of sizes are available including NATO grommets, grommet kits, we also offer extruded grommet strip for edge protection.

O rings

We offer a full range of metric/imperial 'O' rings, these are available in nitrile, EPDM, neoprene, silicone, flurosilicone, polyurethane, Viton and PTFE etc, we also supply 'O' ring cord in various materials, together with 'O' ring kits. for non- standard sizes we can offer spliced/butt jointed.

Washers

We stock a comprehensive range of punched/lathe cut rubber washers in many sizes, together with a full range of tap & plumbing washers, we also offer nylon spacer, shoulder, finishing & cup washers, trepanned/lathe-cut rings & large hand- cut gaskets upto 4 mtrs in diameter in all non- metallic materials,self-adhesive backed if required.

Rubber headed tacks

We hold stocks of 10mm rubber headed tacks for fixing to the base of wooden cabinets etc, also available for similar use are plastic furniture glides in 10/13/16 & 19mm sizes, we also offer push-in mushroom & flat top buffers with rubber stems.

Guage glass cones

We stock gauge glass cones in 13mm (1/2") & 19mm (3/4") sizes, we also have moulds for other sizes which can be made to order.

Tube end fittings

We have a very comprehensive range of rubber tube end fittings for the furniture and allied trades, these include fittings for round/square/rectangular & oval tube, push-in & push-over types in both metric & imperial sizes, most types can be supplied to order in colours, we also have a similar range of plastic tube end fittings.

Door/ window wedges

Door wedges & window wedges held in stock in a variety of colours, other colours to special order, rubber safety chock wedges also available in many sizes, together with wooden door wedges.

Sink plugs

We stock a full range of white rubber basin/bath plugs from 1" (25mm) upto 2.1/4" (57mm) including odd sizes, we also supply plastic plugs in black & white in the most popular sizes.

Custom mouldings

We offer a complete custom moulding service to your exact specifications, in a range of natural or synthetic rubber polymers, we supply precision mouldings for the domestic appliance, electrical, medical & many other industries,& can assist with design/technical difficulties to ensure the correct material is specified for the environment involved.

Cord

We stock a range of rubber cord in both solid & sponge, including natural rubber, nitrile, silicone, neoprene, viton etc along with plastic cord: PVC, nylon, polypropylene, polyethylene, acetal, PTFE & polyurethane etc, we can manufacture virtually any size/hardness/material of cord to special order.

Weatherstrip

Many sizes of window weatherstrip are available with numerous combinations of panel & glass thickness available, a range of filler strips also available to complement the range.

Tubing/ sleeving

We offer a vast range of tubing / sleeving in rubber, neoprene, viton, nitrile, silicone, EPDM, butyl, latex, PVC, Food quality & specialist tubing for player pianos etc. Tubing / sleeving is available in many standard sizes but we can also custom manufacture to your exact specifications if required in almost any size / material etc, special colours can be produced depending on material required.

Channel strip

We hold stocks of rubber 'U' section channel strip in both square/round base,together with PVC edge trim, for protection of sharp edges on sheet metal etc,we have many dies available for both rubber & PVC sections, but dies are not costly & we would be pleased to quote for your exact requirements.

Stair nosing

Rubber stair nosing in choice of sizes with tread, for extra non-slip resistance,we also supply plastic stair nosings in a range of different types/colours together with a cornerguard bumper strip for use on external corners to prevent damage from trolleys etc.

Cornerguard

Rubber cornerguard bumper strip supplied in 4 mtr coils for use on external corners in corridors etc, to prevent damage from trolleys etc, we can also supply screw-on type moulded rubber corner protector buffers.

Marine fender

We offer an extensive range of hollow & solid 'D' section fendering in rubber & PVC (in black and white) covering a broad range of uses on boats, lorries & loading bays etc.

Square / rectangular strip

We offer square/rectangular strip, in sponge/foam and solid types in a range of different materials for all sealing applications, with self-adhesive backing if required, we can also offer an unlimited range of sizes cut from sheeting of all descriptions.

Square catapult elastic / shock cord

Square catapult elastic held in stock in several sizes, other sizes to order. Also available is shock cord in either coil form or in various lengths complete with end fittings for luggage elastics.

Boot seal

We have a range of boot seal/draught excluder profiles, consisting of a combination rubber/wire carrier & sponge rubber profile to cover many automotive and similar applications.

PVC edge trim

PVC edge trim is available in various sizes to fit plate thickness of between 0.8mm to 6.5mm, metal reinforced, grips permanently to edges, can be applied by unskilled labour and to speed up production, requires no tacking/glueing/riveting etc & overcomes the normal problems associated with edge protection whilst enhancing the appearance.

'D', 'L', 'H', 'P' and 'T' profiles

We offer many rubber profiles, hollow & solid 'D' 'L' angle, 'T' & 'H' sections, 'P' sections in hollow/solid/sponge form for door seals etc, we also offer a range of plastic sections in both rigid & flexible PVC etc. New dies are not expensive & we would be pleased to quote for profiles to your exact specification.

Special sections

Whilst we have 1000's of existing dies available to suit most applications, we shall be pleased to quote for your specific requirements against either drawings or samples, new dies are not expensive and we offer a very competitive price and reliable delivery service for both rubber/plastic extrusions (rigid, semi-rigid & flexible sections).

Solid rubber

We offer a full range of solid rubber & associated products: natural/insertion/nitrile/EPDM(inc WRC approved)/neoprene(polychloroprene)/butyl/viton/ silicone/hypalon/shot-blast/food quality/latex and polyurethane etc, these are available in a range of gauges & can be supplied in rolls/cut sheets/strip/ washer form, all self-adhesive backed if required.

Nylon

Nylon is a versatile engineering plastic, it is hard and tough, with good wear/chemical resistance & a good electrical insulator, available in sheet/strip & cord form etc, also flat/sleeve/spacer/shoulder washers etc, we also supply parts machined from nylon together with custom mouldings if required.

Leather

Leather can be supplied in sheet form/press cut flat washers. Leather is easily moulded to any shape, to produce rings, U seals, moulded cup seals, & cases etc we can also supply in strip form for use as hydrant straps etc.

Cork

Cork is a durable & very versatile material used in many sealing applications, available in various grades: plain, agglomerate, protein bonded, resin bonded, neoprene & nitrile bonded corks to cover many uses, can be supplied in sheet, strip & gasket form.

O'rings

We offer a full range of metric/imperial 'O' rings, these are available in nitrile, EPDM, neoprene, silicone, flurosilicone, polyurethane, Viton and PTFE etc, we also supply 'O' ring cord in various materials, together with 'O' ring kits. for non- standard sizes we can offer spliced/butt jointed.

Sponge-foams

We offer a full range of sponge/foam products in rubber and plastic: Expanded closed-cell EPDM/ neoprene/silicone/nitrile/chip-foam/PVC etc, also open-cell sponge rubber, open-cell foams such as polyethylene, polyurethane, polyether & polyester etc, these materials are available in sheet/roll/strip and gasket form, plain or self-adhesive backed.

Asbestos-free products

We offer a comprehensive range of non-asbestos products to cover a multitude of high temperature sealing applications: non-asbestos millboard, paper, proofed glass cloth, asbestos free textiles, glass yarn, glass fibre filled rope lagging, glass webbing, ceramic fibre textiles, produced in sheet, rope, yarn, tape & gasket form.